Replacement disc blades that fit the Krause TL6200 Vertical Tillage. In stock, ships from Ames, Iowa. Free shipping on orders $600+. Call the concierge line at 515-686-5575 with your serial number if you're not sure which blade you need.
Krause TL6200 blade fitment at a glance
- Machine family: Vertical Tillage
- Common blade sizes: 22", 24"
- Edge configuration: notched (aggressive residue-cutting front-gang blades)
- Typical axle bore: 1-1/4" sq
Shop Krause TL6200 blades by size
- 22" blades — in stock
- 24" blades — in stock
Ordering the right blade for your Krause TL6200
To be certain the blade you order fits, verify three specs on your worn blade before ordering:
- Outside diameter — measure across the full width of the blade in inches. Blades wear from the outside in, so measure a low-wear reference blade if possible.
- Axle bore — 1-1/4" sq is standard for the Krause TL6200, but confirm on your machine.
- Edge profile — notched (aggressive residue-cutting front-gang blades). Match what came off, unless you're intentionally changing edge to change residue behavior.
If any of those are unclear, call 515-686-5575 and we'll match a blade from stock.
Other Krause models we cover
- Krause 4900 disc blades
- Krause 5635 disc blades
- Krause 5645 disc blades
- Krause 5700 disc blades
- Krause 8000 disc blades
- Krause Excelerator 8000 disc blades
- Krause Excelerator 8005 disc blades
- Krause Landmaster disc blades
Related resources
- Krause disc blades collection
- All disc blades for sale — full catalog
- How to size disc blades — blade sizing guide
- Notched vs. smooth disc blades
- When to replace disc harrow blades
Frequently asked questions
What size disc blades fit the Krause TL6200?
The Krause TL6200 (Vertical Tillage) typically runs 22", 24" blades depending on the gang and configuration. Confirm by measuring the outside diameter of a worn blade on your machine, or call 515-686-5575 with your model serial and we'll match it.
Are these OEM Krause blades?
No — these are premium replacement disc blades manufactured to fit the Krause TL6200. They match OEM dimensions, edge profile, and axle bore, and are drop-in replacements. DiscBladesForSale.com is not affiliated with Krause.
What edge should I use — notched or smooth?
On a vertical tillage like the Krause TL6200, the standard configuration is notched (aggressive residue-cutting front-gang blades). If you're running heavy corn stalks or no-till, run notched on the front gangs. If soil finish matters more than residue cut, run smooth.
DiscBladesForSale.com is not affiliated with, endorsed by, or sponsored by Krause. "Krause" and "TL6200" are trademarks of their respective owners, referenced here only to describe blade fitment.