Replacement disc blades that fit the Salford I-1200 Independent Series Disc. In stock, ships from Ames, Iowa. Free shipping on orders $600+. Call the concierge line at 515-686-5575 with your serial number if you're not sure which blade you need.
Salford I-1200 blade fitment at a glance
- Machine family: Independent Series Disc
- Common blade sizes: 22", 24", 26"
- Edge configuration: notched (aggressive residue-cutting front-gang blades)
- Typical axle bore: 1-1/4" sq
Shop Salford I-1200 blades by size
- 22" blades — in stock
- 24" blades — in stock
- 26" blades — in stock
Ordering the right blade for your Salford I-1200
To be certain the blade you order fits, verify three specs on your worn blade before ordering:
- Outside diameter — measure across the full width of the blade in inches. Blades wear from the outside in, so measure a low-wear reference blade if possible.
- Axle bore — 1-1/4" sq is standard for the Salford I-1200, but confirm on your machine.
- Edge profile — notched (aggressive residue-cutting front-gang blades). Match what came off, unless you're intentionally changing edge to change residue behavior.
If any of those are unclear, call 515-686-5575 and we'll match a blade from stock.
Other Salford models we cover
Related resources
- Salford tillage blades
- All disc blades for sale — full catalog
- How to size disc blades — blade sizing guide
- Notched vs. smooth disc blades
- When to replace disc harrow blades
Frequently asked questions
What size disc blades fit the Salford I-1200?
The Salford I-1200 (Independent Series Disc) typically runs 22", 24", 26" blades depending on the gang and configuration. Confirm by measuring the outside diameter of a worn blade on your machine, or call 515-686-5575 with your model serial and we'll match it.
Are these OEM Salford blades?
No — these are premium replacement disc blades manufactured to fit the Salford I-1200. They match OEM dimensions, edge profile, and axle bore, and are drop-in replacements. DiscBladesForSale.com is not affiliated with Salford.
What edge should I use — notched or smooth?
On a independent series disc like the Salford I-1200, the standard configuration is notched (aggressive residue-cutting front-gang blades). If you're running heavy corn stalks or no-till, run notched on the front gangs. If soil finish matters more than residue cut, run smooth.
DiscBladesForSale.com is not affiliated with, endorsed by, or sponsored by Salford. "Salford" and "I-1200" are trademarks of their respective owners, referenced here only to describe blade fitment.