Replacement disc blades that fit the Unverferth Rolling Harrow 220 Rolling Harrow. In stock, ships from Ames, Iowa. Free shipping on orders $600+. Call the concierge line at 515-686-5575 with your serial number if you're not sure which blade you need.
Unverferth Rolling Harrow 220 blade fitment at a glance
- Machine family: Rolling Harrow
- Common blade sizes: 17", 18"
- Edge configuration: smooth (weight-transfer or coulter-style blades)
- Typical axle bore: 1" round
Shop Unverferth Rolling Harrow 220 blades by size
- 18" blades — in stock
Ordering the right blade for your Unverferth Rolling Harrow 220
To be certain the blade you order fits, verify three specs on your worn blade before ordering:
- Outside diameter — measure across the full width of the blade in inches. Blades wear from the outside in, so measure a low-wear reference blade if possible.
- Axle bore — 1" round is standard for the Unverferth Rolling Harrow 220, but confirm on your machine.
- Edge profile — smooth (weight-transfer or coulter-style blades). Match what came off, unless you're intentionally changing edge to change residue behavior.
If any of those are unclear, call 515-686-5575 and we'll match a blade from stock.
Other Unverferth models we cover
Related resources
- Unverferth disc blades collection
- All disc blades for sale — full catalog
- How to size disc blades — blade sizing guide
- Notched vs. smooth disc blades
- When to replace disc harrow blades
Frequently asked questions
What size disc blades fit the Unverferth Rolling Harrow 220?
The Unverferth Rolling Harrow 220 (Rolling Harrow) typically runs 17", 18" blades depending on the gang and configuration. Confirm by measuring the outside diameter of a worn blade on your machine, or call 515-686-5575 with your model serial and we'll match it.
Are these OEM Unverferth blades?
No — these are premium replacement disc blades manufactured to fit the Unverferth Rolling Harrow 220. They match OEM dimensions, edge profile, and axle bore, and are drop-in replacements. DiscBladesForSale.com is not affiliated with Unverferth.
What edge should I use — notched or smooth?
On a rolling harrow like the Unverferth Rolling Harrow 220, the standard configuration is smooth (weight-transfer or coulter-style blades). If you're running heavy corn stalks or no-till, run notched on the front gangs. If soil finish matters more than residue cut, run smooth.
DiscBladesForSale.com is not affiliated with, endorsed by, or sponsored by Unverferth. "Unverferth" and "Rolling Harrow 220" are trademarks of their respective owners, referenced here only to describe blade fitment.