Replacement disc blades that fit the Yetter 2967 No-Till Coulter. In stock, ships from Ames, Iowa. Free shipping on orders $600+. Call the concierge line at 515-686-5575 with your serial number if you're not sure which blade you need.
Yetter 2967 blade fitment at a glance
- Machine family: No-Till Coulter
- Common blade sizes: 15", 16", 17"
- Edge configuration: wavy and smooth coulter blades
- Typical axle bore: 1" round
Shop Yetter 2967 blades by size
- 16" blades — in stock
Ordering the right blade for your Yetter 2967
To be certain the blade you order fits, verify three specs on your worn blade before ordering:
- Outside diameter — measure across the full width of the blade in inches. Blades wear from the outside in, so measure a low-wear reference blade if possible.
- Axle bore — 1" round is standard for the Yetter 2967, but confirm on your machine.
- Edge profile — wavy and smooth coulter blades. Match what came off, unless you're intentionally changing edge to change residue behavior.
If any of those are unclear, call 515-686-5575 and we'll match a blade from stock.
Other Yetter models we cover
Related resources
- Yetter disc blades collection
- All disc blades for sale — full catalog
- How to size disc blades — blade sizing guide
- Notched vs. smooth disc blades
- When to replace disc harrow blades
Frequently asked questions
What size disc blades fit the Yetter 2967?
The Yetter 2967 (No-Till Coulter) typically runs 15", 16", 17" blades depending on the gang and configuration. Confirm by measuring the outside diameter of a worn blade on your machine, or call 515-686-5575 with your model serial and we'll match it.
Are these OEM Yetter blades?
No — these are premium replacement disc blades manufactured to fit the Yetter 2967. They match OEM dimensions, edge profile, and axle bore, and are drop-in replacements. DiscBladesForSale.com is not affiliated with Yetter.
What edge should I use — notched or smooth?
On a no-till coulter like the Yetter 2967, the standard configuration is wavy and smooth coulter blades. If you're running heavy corn stalks or no-till, run notched on the front gangs. If soil finish matters more than residue cut, run smooth.
DiscBladesForSale.com is not affiliated with, endorsed by, or sponsored by Yetter. "Yetter" and "2967" are trademarks of their respective owners, referenced here only to describe blade fitment.